The ezeSCAN5 is specifically designed for University and Analytical Laboratories where more complex potentiostats are usually not required.

The easy to use PC based software for setup, graphical display and analysis, whilst simply connecting to your PC via a USB cable.

The potentiostat is offered at a competitive  price, and comes with 4 user selectable current ranges of 1, 10, 100 and 1000 microamps, which can either be set manually or automatically controlled.

SPECIFICATIONS

• Applied potential:+/- 2V
• Compliance voltage +/-5V
• Max applied current:1 mA
• Max scan rate:10,000 mV per second
• Applied output resolution: (V&I) 1mV & 1 µA
• Measured input resolution (V&I):0.1 mV & 20 pA
• Reading intervals:1,5,10, 60, 120, 300, 600 second
• Number of readings; 1 to 10000

TECHNIQUES AND OPTIONS

The instruments can either be powered by batteries or by a mains adapter.

Techniques include: Cyclic Voltammetry, Linear Sweep Voltammetry, Chronoamperometry, Square Wave Voltammetry, Differential Pulse Voltammetry, ASV and CSV. 

Cyclic Voltammetry

+/- 2.0V start and end potential  

1 mV/sec to 10V/sec scan rate

1 to 10 cycles (0 - 1000 seconds delay between cycles)

1,2,5,10 mV potential steps

1 - 1000 millisec sample intervals

Linear Sweep Voltammetry

+/- 2.0V start and end potential  

1 mV/sec to 10V/sec scan rate

1,2,5,10 mV potential steps

1 - 1000 millisec sample intervals

Chronoamperometry(fast)

+/- 2.0 V applied potential

5,10,20,50,100,500,1000 millisecs reading intervals

1 to 1000 readings

Chronoamperometry(slow)

+/- 2.0V applied potential

1,5,10,30,60,300,600 second reading intervals

1 to 5000 readings

Square Wave Voltammetry

+/- 2.0V start and end potential  

10 mV/sec to 10V/sec scan rate

1,2,5,10, 20 mV potential steps

10 - 500 Hz sampling  

5 - 200 mV amplitude